This is an old revision of the document!
LED
On the CT Board are 32 LEDs mounted. They are arranged in 4 groups of 8 LEDs and are “active-high”.
E.g. the LEDs are on if a logical “1” is written.
Please make sure the CT Board is in the correct mode.
Supported modes: 1, 2, 3
Registers
The Registers are read / write.
| Address | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
|---|---|---|---|---|---|---|---|---|
| 0x6000'0100 | LED7 | LED6 | LED5 | LED4 | LED3 | LED2 | LED1 | LED0 |
| 0x6000'0101 | LED15 | LED14 | LED13 | LED12 | LED11 | LED10 | LED9 | LED8 |
| 0x6000'0102 | LED23 | LED22 | LED21 | LED20 | LED19 | LED18 | LED17 | LED16 |
| 0x6000'0103 | LED31 | LED30 | LED29 | LED28 | LED27 | LED26 | LED25 | LED24 |
Diagram
