Binary Interface

The binary interface can be used to display binary values in HEX representation. A maximum of 128 bits can be displayed.

Please make sure the CT Board is in the correct mode.
Supported modes: 1, 2, 3, 4

The Registers are read / write.

Base address: 0x6000'0330

The code snippet bellow shows how to use the ASCII interface of the LCD.

#include "reg_ctboard.h"
 
CT_LCD->BIN.BYTE.B7_0 = (uint8_t) data_byte;           /* Write byte of data to LCD. */
CT_LCD->BIN.HWORD.B31_16 = (uint16_t) data_halfword;   /* Write halfword of data to LCD. */
CT_LCD->BIN.WORD.B63_32 = (uint32_t) data_word;        /* Write word of data to LCD. */

.equ ADDR_LCD_BIN,   0x60000330
 
        ldr     r0,  =ADDR_LCD_BIN
        strb    r1,  [r0, #0]           // Write byte of data to LCD.
        strh    r1,  [r0, #2]           // Write halfword of data to LCD.
        str     r1,  [r0, #4]           // Write word of data to LCD.