Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Memory Bus Visualization on Oscilloscope ====== There is a mode to visualize the bus on a oscilloscope. \\ The ports are specially configured to directly plug in the logic probe of a Tektronix logic analyzer. \\ \\ > {{ctboard:ctboard_mode_3.svg?48px }} Please make sure the CT Board is in the correct mode. > Supported [[ctboard:mode_switch|mode]]: **3**. \\ ===== Pin Out ===== \\ {{ ctboard_gpio_probe.png?300em}} {{ctboard_gpio_probe_reg.svg}} \\ \\ ctboard/peripherals/memory_bus_osci.txt Last modified: 2022/12/27 17:33by ruan