Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== External Memory Bus ====== The CT Board is connected to the microcontroller through the SRAM interface. This interface is also available on ports P1..4. \\ The full SRAM interface is connected. \\ \\ > {{ctboard:ctboard_mode_2.svg?48px }} Please make sure the CT Board is in the correct mode. > Supported [[ctboard:mode_switch|mode]]: **2**. \\ ===== Pin Out ===== \\ {{ctboard_gpio_stm32_reg.svg}} \\ \\ ctboard/peripherals/memory_bus.txt Last modified: 2017/08/29 09:37by feur