Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Potentiometer ====== The Potentiometer is directly connected to the STM32F429ZI microcontroller on [[stm32:peripherals:adc|ADC3 channel 4]]. \\ \\ > {{ctboard:ctboard_mode_no.svg?48px }} This functionality is independent of the CT Board mode. > Supported modes: Available in all [[ctboard:mode_switch|modes]]. \\ ==== Programming Example ==== To configure and use the potentiometer, setup [[stm32:peripherals:adc|ADC]] on the microcontroller. \\ \\ ===== Diagram ===== \\ {{:ctboard:peripherals:ctboard_analog.svg?700em}} \\ \\ ctboard/peripherals/analog.txt Last modified: 2016/02/25 10:53by feur