Differences

This shows you the differences between two versions of the page.

--- stm32:peripherals:rcc [2016/02/29 09:27] – feur
+++ stm32:peripherals:rcc [2022/12/27 19:28] (current) – ruan
@@ Line 1: / Line 1: @@
-====== Reset and Clock Control ======
+====== Reset and Clock Control (RCC) ======
-{{clock_complete.svg?350em}}
+These registers allow to configure the system clock and enable / disable peripherals.
+  * [[stm32:peripherals:rcc_clock|RCC Setup System Clocks]]
+  * [[stm32:peripherals:rcc_peripherals|RCC Enable/disable clocks for peripherals and reset peripherals]]
+\\ {{clock_complete.svg}} \\ \\
-===== Peripheral Configuration Registers =====
-\\
-==== AHB1 Peripherals ====
-\\ {{clock_reg_ahb1_r.svg}} \\ \\
-==== AHB2 Peripherals ====
-\\ {{clock_reg_ahb2_r.svg}} \\ \\
-==== AHB3 Peripherals ====
-\\ {{clock_reg_ahb3_r.svg}} \\ \\
-==== APB1 Peripherals ====
-\\ {{clock_reg_apb1_r.svg}} \\ \\
-==== APB2 Peripherals ====
-\\ {{clock_reg_apb2_r.svg}} \\ \\
-==== Register Description ====
-\\
-=== xxxxENR ===
-|< 100% 5em 5em >|
-|zEN|0|Peripheral clock disabled|
-|zEN|1|Peripheral clock enabled|
-=== xxxxLPENR ===
-|< 100% 5em 5em >|
-|zLPEN|0|Peripheral clock disabled during sleep mode|
-|zLPEN|1|Peripheral clock enabled during sleep mode|
-=== xxxxRSTR ===
-|< 100% 5em 5em >|
-|zLPEN|0|Peripheral **not** reset|
-|zLPEN|1|Resets peripheral|
-===== Legend =====
-\\ {{legende.svg}} \\ \\