Differences

This shows you the differences between two versions of the page.

--- ctboard:peripherals:lcd_bg [2017/08/29 09:27] – [Programming Example] ruan
+++ ctboard:peripherals:lcd_bg [2026/06/25 15:11] (current) – [Programming Example] scbj
@@ Line 7: / Line 7: @@
 > Supported [[ctboard:mode_switch|modes]]: **1**, **2**, **3**, **4**
 \\
+===== Registers =====
+The Registers are read / write.
+\\ {{ctboard_lcd_pwm_reg.svg}} \\ \\
 ===== Programming Example =====
@@ Line 21: / Line 27: @@
 \\
-<code asm>
+<code text>
-ADDR_LCD_BG     EQU      0x60000340
+.equ ADDR_LCD_BG,    0x60000340
-                LDR      r0, =ADDR_LCD_BG
+        ldr     r0,  =ADDR_LCD_BG
-                LDR      r1, =0xffff
+        ldr     r1,  =0xffff
-                STRH     r1, [r0, #0]             ; Set PWM value for red background light.
+        strh    r1,  [r0, #0]          // PWM value for red background light.
-                STRH     r1, [r0, #2]             ; Set PWM value for green background light.
+        strh    r1,  [r0, #2]          // PWM value for green background light.
-                STRH     r1, [r0, #4]             ; Set PWM value for blue background light.
+        strh    r1,  [r0, #4]          // PWM value for blue background light.
 </code>
 \\
-===== Registers =====
-The Registers are read / write.
-\\ {{ctboard_lcd_pwm_reg.svg}} \\ \\